The Winchesters are good nevertheless from what I have observed the CX2000 primer looks hotter, These are both of those regarding the identical in reliability.
The 209 primers are meant to present pressure towards the powder, which aids in sustaining a dependable velocity and minimizing the development of gun rings usually.
Possibly it's anything to do While using the angled firing pins used by over/below shotguns. The BT-99 incorporates a straight line firing pin as do most all pumps and autoloaders.
The CX2000 primers appear to be a lot a lot more reliable and do the job rather perfectly with Metal powder, for me a minimum of.
"A properly regulated Militia, currently being needed to the safety of the free Point out, the appropriate on the folks to maintain and bear Arms, shall not be infringed"
Not that long ago a person had some ExtraLite loads tested they usually came back again surprisingly higher as well, and all you, and many Other folks did was to operate extra time to beat that poster down to in some way prove that it was in some way his fault.
Winchester primers do give some people matches when utilizing with Remington hulls at reprime. It always involves an adjustment on the rammer tube, on my 9000H I needed to drop it 1/eight" from wherever it had been established when applying AA CF and AA HS hulls. There are other remedies Nonetheless they have already been beaten to death in various other threads.
I had some tests performed with loads making use of Ramshot Competitors, also a ball powder, and also the pressue discrepancies among the Gain primer as well as winchester 748 powder the Cheddite primer had been comparable to the Titwad data. Maybe it's a flake/ball powder thing.
In all probability nothing at all you are able to do about this, mainly because it will likely be brought about since the hulls have gotten damp and the initial primer and metal head have began to corrode, While there may not be some actual proof of it. Click to grow...
"A Liberal is someone that isn't going to care That which you do, so long as It can be mandatory". - Charles Krauthammer
I am jogging a MEC9000GN on an Automate. I can see the .005" extra thickness leading to problems with rotation, but I am unable to see what exactly is producing the bulge.
I feel have been the primers that weren't incredibly trusted ! I have some NEW Ched hulls with black sealer but These are a minimum of 10
winders stated: Sure, there are several recipes where you could swap the Winchester 209 primer Along with the Cheddite 209 primer. Even so the stress would Ordinarily be employ as would the velocites.
